User Manual

[page 38] | gpelectric.com
6. SPECIFICATIONS
Electrical Specication Item GP-SW1500TS-112
Input
Characteristics
DC Voltage 12VDC
Fuse 6 x 40A
Voltage Range 10.0 ~ 16.0VDC
No Load Current
< 0.9A
Power Saving Mode <0.9A @12VDC
Output
Characteristics
Continuous Output Power 1500W (de-rating after 40°C, refer to de-rating curve)
Surge Power 3000W
Output Voltage 100 / 110 / 115 / 120VAC ±3%
Efciency Max. 88%
Total Harmonic Distortion
(THD)
< 3% @ under condition : greater than 1.15 times of
the rated VDC, 115V / linear load)
Output Waveform Pure Sine Wave
AC Input
AC Range 100 / 110 / 115 / 120VAC ± 12.5%
Frequency Selectable 50 / 60 Hz
Synchronous Frequency 47 - 57 / 53 - 63 Hz
Circuit Breaker 20A
Transfer Switch (Refer to
Transfer - Time Table.)
Standard ATS : Inverter to utility AC: <5ms.; Utility AC
to inverter. <10ms.
Protection
BAT.Low Alarm ± 3% 10.5VDC
BAT.Low Shut-down ± 3% 10.0VDC
BAT.Low Restart ± 3% 11.5VDC
BAT.High Alarm ± 3% 15.5VDC
BAT.High Shut-down ± 3% 16.0VDC
BAT.High Restart ± 3% 15.0VDC
Input Protection
Reverse Polarity (Fuse) / Under Voltage / Over
Voltage Protection / AC over current (Breaker)
Output Protection
Short Circuit / Overload / Over Temperature / Over
Voltage
Environment
Operating Temp.
-20 °C~40 °C refer to GP-SW1500TS power de-
rating curve
Storage Temp. -40 °C~70 °C
Relative Humidity Max. 90%, non-condensing
Safety & EMC
Safety Standards Certied UL 458 (6th Edition)
EMC Standards Certied FCC class B
Dimension(WxHxD)
283x128x351 mm / 11.14x5.04x13.82 inch
Weight
5.5 kg
Cooling
Temperature & Load Controlled Cooling Fan
LED Indicator
Input voltage level, faulty status
Remote Control
GP-SWR-A and GP-SWR-B
Remote Port
RJ-11 type connector
The specications are subject to change without prior notice. All the test environments are conducted under the rated power operation conditions.