User Manual

gpelectric.com | [page 35]
OPERATION
ENB
ENB
GND
BAT+
BAT-
ON:INV. ON
OFF
OFF:INV.
ON:INV. ON
DC
POWER
+
-
OFF
OFF:INV.
ENB
GND
ON: INV. ON
OFF: INV. OFF
ENB
GND
HI: INV. ON [TR ON]
LOW: INV. OFF [TR OFF]
4.6.1 REMOTE CONTROL GREEN TERMINAL
PIN# PIN Assignment
1 GND
2 -ENB
3
ENB
4
No Use
5
No Use
Remote control green terminal (1) may be connected to a Form C relay for “FAULT” indication.
When “FAULT” occurs, the relay switches.
• Before installing the inverter, please ensure that the main switch is in the OFF
position.
• Before using the remote control terminal, please ensure the main switch is in
the REMOTE position.
• Use 20 ~ 24 #AWG wire to connect the remote control terminal.
• Remote control ON/OFF inverter setup status.