User Manual

GP-PWM-30
________________________________________________________________________
15
Errors
Over Voltage
If the GP-PWM-30 experiences a
battery over voltage (15.5V), the
controller will stop operating and the
display will begin to flash. The
controller will resume operating
when the error is cleared.
Icons Displayed: Battery, Volt
Symbol, Lightning Bolt
Low Voltage
If the GP-PWM-30 experiences the
battery state of charge reaching 0
%, a lightning bolt symbol will
begin to flash in the lower right
corner of the display. The
controller will continue oper
ating.
The controller will only stop
operating if the voltage drops
below 6 volts.
Icons Displayed: Battery, Percent Symbol, Lightning Bolt
© 2018 Go Power! By Valterra Power