User Manual

Table Of Contents

GP-PWM-30

________________________________________________________________________

6.0 Operating Instructions

Power Up

When the GP-PWM-30 is

connected to the battery, the

GP-PWM-30 will go into Power

Up mode.

Icons Displayed: Three

horizontal dashes

Setting the Battery Type / Charging Profile

Set the Battery Type / Charging

Profile by holding down the B

Button for 5 seconds. When the

display shows a single digit

number, release the B Button.

Set the Battery Type by toggling

through the Charging Profile

numbers 1, 2 or 3 by pressing

the B Button.

NOTE: Non-volatile memory: A

ny settings made on the GP-PWM-30

will be saved even when the power has been disconnected from the

controller.