________________________________________________ GP-MPPT-PRO-BT-1 Bluetooth Dongle Owner’s Manual
gp electric.com Product Instructions The GP-MPPT-PRO-BT-1 is compatible with Go Power!’s Bluetooth ready solar controllers and can work seamlessly with the Go Power! Connect mobile app giving you the ability to wirelessly monitor you controller’s parameters setting and data view. Main Features 1. Convenient wireless monitoring of your solar controller 2. Supports the Go Power! Connect mobile app allowing for simple set-up and plug & play functionality 3.
gp electric.com Product Features Communication status indicator light Mounting holes Communication line Product Dimensions Model：GP-MPPT-PRO-BT-1 External dimensions：66.3 x 51 x 15mm Fixed holes dia：φ3.
gp electric.com System Wiring Diagram Note: Cable using the standard network cable (parallel line) connect. Specifications Type GP-MPPT-PRO-BT-1 Input voltage 5V-12V Stand-by power consumption 0.04W Run power consumption 0.05W Communication distance ≤15m Serial port baud rate Fixed baud rate 9600bps RS232 Communication methods Interface type Connecting line RJ12 Standard network cable (parallel line) Size Installation dimension Fixed holes dia Operating temperature 66.3 x 51 x 15mm 57.
________________________________________________ Go Power! ConnectTM Connectivity Instructions Welcome to the Go Power! ConnectTM Manual. You can use the Connect app to configure, monitor and diagnose all our products which have built-in Bluetooth capability or are equipped with a Go Power! direct port. For a complete list of products compatible with Go Power! Connect, please visit gpelectric.com. Go Power ConnectTM can be used on devices running Android or iOS. Go Power! ConnectTM Available on 1.
gp electric.com 2. Bluetooth Dongle - Pairing and Connecting 1. Open Go Power! ConnectTM 2. On your Phone or Tablet: pull down the screen to initiate a scan for available devices. 3. The first time you attempt to connect the phone will ask to 'pair' with the device. Enter the pin code. The default pin code is 000000. 4. Connection is complete. If connection was not successful please refer to section 9. Troubleshooting below. Note: Always connect from within the Go Power! ConnectTM app.
gp electric.com 3.2 Apple iOS iPhones and iPads The Connectivity app works on the following iPhones and iPads, which have Bluetooth 4.0 (BT LE) and iOS 8 or later, which is required: • Phone 4S and later (due to Bluetooth Low Energy support) • iPad 3rd generation and later Unfortunately Apple iPhone/iPad doesn't support USB OTG.
