MPPT-PRO-60 Spec Sheet

gpelectric.com
© 2020 Go Power! Doc: SPEC_GP-MPPT-60-PRO_RevA
40/60 Solar Controller Remote GP-MPPT-PRO-40-60-R
Accessories Available
Access your device using Bluetooth through the Go
Power! Connect app.
Available for FREE download on:
GO POWER! CONNECT
The GP-MPPT-PRO-R-40/60 is a surface
mounted remote display for the GP-MPPT-40-
PRO and GP-MPPT-60-PRO charge controllers.
The remote shows the charge current to the
battery, battery voltage, and battery state of
charge (SOC).
The GP-MPPT-PROBT-1-40/60 is compatible with Go
Power!’s Bluetooth
®
ready GP-MPPT-PRO-40 and GP-
MPPT-PRO-60 solar controllers and can work seamlessly
with the Go Power! Connect mobile app giving you the
ability to wirelessly monitor you controller’s parameters
setting and data view.
SPECIFICATIONS
Input Voltage
5-12V
Standby Power Consumption 0.04W
Operating Power Consumption 0.05W
Communication Distance ≤15m
Serial Baud Rate Fixed baud rate: 9600bps
Communication Mode RS232
Port Type RJ12
Connection Mode Standard network cable (parallel cable)
Operating Temperature -20˚C to 75˚C
Dimensions (H x W x D) 2.60 x 2.01 x 0.61 inches (66 x 51 x 15.5mm)
Installation Dimensions 2.26in, ø0.13in (57.5mm, ø3.2mm)
Protection IP67
Weight 0.12kg / 0.26lbs
Warranty 2 Years
• Allows wireless monitoring and control of controller
• Supports an easy-to-use Plug & Play app
• Employs a dedicted Bluetooth
TM
4.0 and BLE
technologies for quick communication
• Up to 15m communication distance
• 2-year warranty
SPECIFICATIONS
System Voltage
12/24V
Battery Voltage Range 9V – 32V
Operating Consumption
(Display Backlight ON)
<0.04W
Operating Consumption
(Display Backlight OFF)
<0.03W
Communication Mode TTL
IP Rating IP32
Display to Controller Port RJ45
Display to Inverter Port RJ11
Operating Temperature -10 to 55°C, 14 to 131°F
Humidity 99% N.C.
Dimensions (H x W x D) 4.56 x 4.56 inches (115.82 x 115.82mm)
Weight 0.5kg / 1lbs
Warranty 2 Years
Use a non-inverting Ethernet cable. GP-MPPT-PRO-R-40-60 is intended for use with
non-inverting Ethernet cables. Use the one provided or be sure to purchase a non-
inverting type.