Quick Start Guide (GP-LIFEPO4-100-12V)

GP-LiFePO
4
-100
Lithium Battery
Quick Start Guide
Find tech tips, manuals and support at gpelectric.com
Only wire 4 batteries maximum in parallel
Do not get wet
Only suitable for 12-volt applications
Do not wire in series
Battery Specications
SPECIFICATIONS
Technology Lithium Iron Phosphate
Nominal Voltage 12.8 V
Rated Capacity
77°F (25 ±5 °C)
100 Ah @ 20A (5hr run time); 92 Ah @ 50A
(1hr 54 min run time; 92 Ah @ 100A (55 min
run time)
Capacity Correction for
Temperature Variations
-4 °F (-20°C) 60%
131°F (55°C) 95%
Maximum Discharge
Current
100A (continuous)
120A (30 minutes)
150A (5 seconds)
Specic Energy Density
121.9 Wh/kg
Volumetric Energy Density
96.1 Wh/L
Internal Resistance
≤ 7.5 mΩ
Terminals
M8 insert
Torque: 11-14.7 Nm (97.3 - 130 lbs)
Charge Voltage 14.6V
Maximum Charge Current 100A
≤1500 @ 100% Depth of Discharge; ≥3000
@ 80%; ≥4500 @ 30%
UN 38.3; CE; ETL
Charge Cut-off Voltage
Cycle Life - 77°F (25°C)
14.6V
Discharge Cut-off Voltage
8.4V
Operating Temperature
Charge: 32°F (0°C) to 131°F (55°C
Discharge: -4°F (-20°C) to 131°F (55°C)
Storage Temperature
1 Week: -4°F (-20°C) to 122°F (50°C)
1 month: -4°F (-20°C) to 113°F (45°C)
6 months
1
: -4°F (-20°C) to 104°F (40°C)
1
Max storage time before recharge is 6 months.
Humidity
3mA
BMS Leakage Current
Length 12.9 in / 328 mm
Width 7 in / 178 mm
Height 9.2 in / 233.7 mm
BCI Group # 31
Weight 36 lbs / 16.33 kg
Carrying Nylon Strap
Operating: 5% to 90 % RH
Storage: 45% to 85% RH