Product Manual (GP-ISW-400)

gpelectric.com | [page 13]
GENERAL INFORMATION
GP-ISW-200 Specification
Electrical
Specification
Model No.
Item
GP-ISW-200-12 GP-ISW-200-24
Input
Voltage
12VDC 24VDC
Voltage Range
10.0~16.0VDC 2 0.0~32.0VDC
No Load Current
< 0.5A < 0.4A
Power Saving Mode
< 0.12A < 0.06A
Efficiency (Typ.)
89% 91%
On Mode @ Save Mode
< 0.12A < 0.06A
On Mode @ No Load Mode
< 0.5A < 0.4A
Output
Continuous Output Power
Over Rated Power
(3 Min.)
230 W
200 W
Peak Power (3 Sec.)
250 W
Frequency
50 / 60 Hz ± 0.5% (Dip Switch Selectable)
Output Voltage
100 / 110 / 115 / 120 VAC ± 5%
(Dip Switch Selectable)
Short-Circuit Protection
2 seconds and restart 3 times shutdown
Output Waveform
Pure Sine Wave (THD < 3%@ Normal Load)
Protection
Input Over-Voltage
Protection
16.0VDC ± 3% 32.0VDC ± 3%
Input Under-Voltage
Protection
10.0VDC ± 3% 20.0VDC ± 3%
BAT. Low Shutdown
10.0VDC ± 3%
20.0VDC ± 3%
BAT. Low Alarm
10.5VDC ± 3%
21.0VDC ± 3%
BAT. Low Restart
12.5VDC ± 3%
25.0VDC ± 3%
BAT. High Alarm
15.5VDC ± 3%
31.0VDC ± 3%
BAT. High Shutdown
16.0VDC ± 3%
32.0VDC ± 3%
BAT. High Restart
14.5VDC ± 3%
29.0VDC ± 3%
Environment
Working Temp.
-20˚C ~ 60˚C
Storage Temp.
-30˚C ~ 70˚C
Working Humidity
10~95% RH, non condensing
Safety &
EMC
Safety Standards
----
EMC standards Certified FCC class B
E-mark
----
Others
Dimension(WxHxD)
150 mm X 68mm X187 mm
Weight
1.6kg
Remote Control
CR-8 (optional)
Cooling
Temperature & Load Controlled cooling Fan
Table 1. GP-ISW-200 Specification
Note：
This test condition is normal DC input and temperature 25˚C
2.5 VOLTAGE AND TEMPERATURE PERFORMANCE
Surge Power (3 Sec.)
GP-SWR-A or GP-ISW-R