Product Manual

gpelectric.com | [page 7]

JP1

The JP1 is to set either the Return Override function or the Ignition Lockout function.

• JP1 jumper “Short” - Return Override function:

• Turns ON the inverter when the auxiliary input wiring is connected to the

reversed gear shift with 12 volts.

• JP1 jumper “Open” - Ignition Lockout function:

•

Turns OFF the inverter when the auxiliary input wiring is connected to the

ACC with 12 volts.

•

The connector which is connected to AUX power must be used with a

12V / 0.5A fuse.

TRIGGERED SIGNAL

JP1 INVERTER STATUS

AUX

1 Open OFF

0 Open ON

1 Short ON

0 Short OFF

Note: default mode is Open.

INTRODUCTION