GP-FLEX-200/100/100E - Product Manual

gpelectric.com
4
GP-FLEX-100
GP-FLEX-200
GP-FLEX-100E
1.4 Required Tools (Additional tools may be required)
a. Phillips / Robertson Screwdriver f. Wire Crimpers
b. Keyhole Saw g. Electric Hand Drill
c. Pencil or Marker h. 1/16 and 3/8 inch Drill Bit
d. Pliers i. 5/16 and 7/16 inch Wrench
e. Wire Strippers j. Sealant
1.3 Parts Checklist
MODEL: GP-FLEX-100 GP-FLEX-200 GP-FLEX-100E
ITEM# DESCRIPTION QTY QTY QTY
01 Ring Terminal Battery Connector 2 2 0
02 50’ MC4 Cable with Male and Female MC4 Connectors 1 1 0
03 Tie Wrap 6 6 6
04 Male (positive) MC4 Parallel Branch Connector 0 1 1
05 Female (negative) MC4 Parallel Branch Connector 0 1 1
06 #10 x 1” Wood Screws 6 12 6
07 #10 x 1.5” Machine Screws 6 12 6
08 #10 Well Nuts 6 12 6
09 #10 Lock Washers 6 12 6
10 #10 Flat Washers 6 12 6
11 3/8” Plastic Cable Clamps 6 12 6
12 #8 x 1” Screws for Cable Clamps 6 12 6
13 Fuse Holder Inline with 30A Fuse 1 2 1
14 Solar Flex Module 1 2 1
15 GP-PWM-30 Controller 1 1 0
01 03
06 1107 08 09 10
04 05
02
14
15
Battery (not included)
30
12 13