User's Manual

GO MBW Getting Started Guide
GO MBW Getting Started GuideGO MBW Getting Started Guide
GO MBW Getting Started Guide
Draft Version - Confidential - Page 20
Hardware and Connectors Installation
There are two methods for mounting the WLS unit:
• On an outer wall (typically on a roof or high location to avoid interference from
other buildings or trees).
• On a pole (again, on a roof or high location).
Wall Mount
GO Networks has an optional adapter that enables the WLS
unit to be installed on a wall.
For more information, contact your local GO Networks
representative.
Pole Mount
The contents of the Pole Mount kit includes:
Qty Item
1
Installation Instructions for WLAN
Sector Base Station Pole Mount
4
Hex Cap Screw f DIN933 M10x180
ST ST A2
4 Flat Washer ST ST M10
4 Spring lock wash ST ST M10
4
Hex Ribbed Flange Bolt M6X16 Steel
Zinc Plated
6 Pan Head Phil. ST ST Screw M5x10
6 Washer Flat ST ST M5
6 Washer Spring ST ST M5
1 Turn Bracket
1 Post Bracket
1 Rear Post Bracket
NOTE: Unless otherwise indicated, all elements are stainless steel.