User's Manual

GO MBW Getting Started Guide
GO MBW Getting Started GuideGO MBW Getting Started Guide
GO MBW Getting Started Guide
Draft Version - Confidential - Page 13
GO WLAN Sector Base Station (WLS)
The WLAN Sector Base Station (WLS) is a high-performance WLAN base station that
supports the simultaneous use of two non-overlapping 802.11b/g channels within a
120° sector. The WLAN Sector Base Station provides a wireless access point through
which WiFi mobile devices can connect to the Internet for voice, video, and data
communication.
WLS Package Components
The WLS unit is shipped ready to install. The WLS unit is packaged with two
connectors: an RJ45 connector with a water-proof cover and a power connector with
a water-proof cover.
In addition, it is recommended that you also order a mounting kit (either wall mount
or pole mount version). The contents of each kit, which is ordered separately, is
detailed in the Installation Process section.
Finally, a typical deployment would include installation of a lightning protector, such
as the optional one that GO Network can supply.
Because cable requirements are often unique to the location and deployment
topology of each installation, power and Ethernet cables are not included in the
installation kit. For more info on cable requirements and connections, see WLS
Component and Cable Connections.
Deployment Options
The WLAN Sector Base Station can operate in one of two modes:
• Comprehensive Mode (MBW-WLS-3100): the WLAN Sector Base Station can
be configured to communicate with the GO Wireless Network Controller (WNC). It
will continue to provide local spectrum management and load balancing
capabilities, but will also be managed by the Wireless Network Controller, which
will provide a more comprehensive global network spectrum management and
load balance capabilities across additional WLAN Sector Base Stations to optimize
performance for all stations.
• Standalone (MBW-WLS-3200): the WLAN Sector Base Station can be
configured to communicate with 3rd party standard Access Controllers. In this
configuration, it will provide local spectrum management and load balancing
capabilities.