User's Manual

- Page 8 of 24 -
All contents are Copyright © 2007 GO Networks, Inc. All rights reserved.
Item
No.
Description
Qty
Picture
H
Nut M8
1
I
Antenna Support Plate
1
Table 2: Mounting Kit Part List
Hardware and Connectors Installation Tools
The following tools are required to mount the MBW 1100 (WLP) on a pole.
Description
Picture
Combination Wrench (13 mm)
13 mm
Table 3: Mounting Tools and Equipment
Note: All hardware and tools used for assembling and mounting the
MBW 1100 (WLP) are Metric.
To assemble the ‘L’ adaptor [C] to the MBW 1100 (WLP) unit:
 Attach the ‘L’ adapter to the MBW 1100 (WLP) using an M8 x25 hex
bolt [E], a spring washer [G], and a flat washer [F], as illustrated in
Figure 1.