User's Manual
Table Of Contents
- Table of Contents
- Introduction
- GO Wireless LAN Pico Base Station (WLP)
- Installation
- Configuring the WLP
- Connect and Access the WLP
- Configuring the Management Connectivity
- Configuring the Device Prompt
- Configuring the Radio Settings
- Configuring Multiple SSIDs
- Deleting an SSID
- Configuring the Mesh Network
- Configuring WDS CPE connection
- Configuring Authentication Types
- Configuring the Radius Client in the WLP
- Configuring Privacy Methods
- Saving the Configuration
- WLP Configuration Example
- Upgrading the WLP Software
- Appendix A: List of Acronyms
- Appendix B: Wiring Specifications
- Page 38 of 38 -
All contents are Copyright © 2006 GO Networks, Inc. All rights reserved.
Appendix B: Wiring Specifications
Console
Port (DTE)
RJ-45-to-RJ-45
Straight Cable
RJ-45 to
DB-9
Terminal
Adapter
Console
Device
Signal RJ-45 Pin RJ-45 Pin DB-9 Pin Signal
No connection 1 1 8 CTS
No connection 2 2 6 DSR
No connection 3 3 5 GND
GND 4 4 5 GND
RxD 5 5 3 TxD
TxD 6 6 2 RxD
No connection 7 7 4 DTR
No connection 8 8 7 RTS
Table 7: Console Port Signaling and Cabling with a
DB-9 Adapter for the WLP Unit