User's Manual
Table Of Contents
- Table of Contents
- Introduction
- GO Wireless LAN Pico Base Station (WLP)
- Installation
- Configuring the WLP
- Connect and Access the WLP
- Configuring the Management Connectivity
- Configuring the Device Prompt
- Configuring the Radio Settings
- Configuring Multiple SSIDs
- Deleting an SSID
- Configuring the Mesh Network
- Configuring WDS CPE connection
- Configuring Authentication Types
- Configuring the Radius Client in the WLP
- Configuring Privacy Methods
- Saving the Configuration
- WLP Configuration Example
- Upgrading the WLP Software
- Appendix A: List of Acronyms
- Appendix B: Wiring Specifications
GO WLP Getting Started Guide
Trademarks and Licensing Agreement
© 2006-2007 GO Networks, Inc. All rights reserved.
All information contained in this document is protected by international
copyright treaties. No information may be copied or reproduced without the
express written consent of GO Networks Inc.
GO Metro Broadband Wireless, GO MBW, WLAN Sector Base Station, WLS, GO
WLAN Pico Base Station, WLP, GO Wireless Network Controller, and WNC are all
trademarks of GO Networks Inc.
Any duplication, transmission by any method, or storage in an information
retrieval system of any part of this publication for other purposes other than
those stated above is strictly prohibited without the specific written permission
of GO Networks, Inc. This includes, but is not limited to, transcription into any
form of computer system for audio, text, print, or visual retrieval. All rights
under federal copyright laws and international laws will be strictly enforced.
All other trademarks and registered trademarks are the property of their
respective owners.
GO Networks Inc.
1943 Landings Drive • Mountain View, CA 94043 • USA
Tel +1.650.962.2000 • Fax +1.650.962.2010
Email support@gonetworks.com
Version 2.3