User's Manual
Table Of Contents
- Table of Contents
- Introduction
- GO Wireless LAN Pico Base Station (WLP)
- Installation
- Configuring the WLP
- Connect and Access the WLP
- Configuring the Management Connectivity
- Configuring the Device Prompt
- Configuring the Radio Settings
- Configuring Multiple SSIDs
- Deleting an SSID
- Configuring the Mesh Network
- Configuring WDS CPE connection
- Configuring Authentication Types
- Configuring the Radius Client in the WLP
- Configuring Privacy Methods
- Saving the Configuration
- WLP Configuration Example
- Upgrading the WLP Software
- Appendix A: List of Acronyms
- Appendix B: Wiring Specifications
- Page 7 of 38 -
All contents are Copyright © 2006 GO Networks, Inc. All rights reserved.
Assembling and Mounting
The universal mount is used to attach and secure the WLP to a wall, a
streetlight arm, or a variety of poles.
The WLP mounting consists of the following stages and should be
performed in the following order:
1. Connect the WLP unit to the brackets using the ‘L’ adaptor.
2. Secure the mounting brackets to a streetlight arm, wall, or pole.
3. Assemble the WLP unit to the bracket.
4. Ground the WLP unit.
5. Align the WLP unit.
6. Mount the Antenna to the WLP unit.
Table 2 lists the universal mount parts:
Item
No.
Description Qty Picture
A Wall/Poll Bracket 1
B Clamping Bracket 1
C
WLP ‘L’ Adapter Wall/Poll
Mount
1
D Hex Bolt M8x70 2
E Hex Bolt M8 x25 1
F Hex Bolt M8x40 1
G Flat Washer M8 3