User's Manual
Table Of Contents
- Trademarks and Licensing Agreement
- Introduction
- GO WLAN Pico Base Station (WLP)
- Installation
- Configuring the WLP
- Connect and Access the WLP
- Upgrading the WLP Software
- Appendix A: List of Acronyms
- Appendix B: Wiring Specifications
- Page 8 of 31-
All contents are Copyright © 2006 GO Networks, Inc. All rights reserved.
Assembling and Mounting
The universal mount is used to attach and secure the WLP to a wall, a
lamppost, or a variety of poles.
The WLP mounting consists of the following stages:
a. Securing the mounting brackets to a wall, lamp post, or pole.
b. Connecting the WLP unit to the brackets using the ‘L’ adaptor.
c. Aligning the WLP unit.
Table 2 lists the universal mount parts:
Item
No.
Description Qty Picture
A Wall/poll bracket 1
B Clamping bracket 1
C
WLP ‘L’ adapter wall/poll
mount
1
D Bolt M8x70 2
E Screw Hex Cap M8 x25 1
F Bolt M8x40 1
G Washer flat M8 3
H Washer spring M8 4
I Nut M8 1