User Manual

To mount the antennas on the MBW 510:
1. Attach the 2.4 GHz band antenna to terminal A2 and screw the
antenna into place by hand. Rotate the antenna at its metallic base.
The antenna should rotate easily. Tighten the antenna by hand only.
Do not apply excessive force by using any tool, as this may damage
the unit.
2.4 GHz
Antennas
Terminal A2
Figure 6: 2.4 GHz Band Antennas Installation
2. Attach the 5 GHz band antenna to terminal B2. Tighten the antenna
by hand at its metallic base. The antenna should rotate easily. Do
not apply excessive force by using any tool, as this may damage the
unit.
5GHz
Antennas
Terminal
B2
Figure 7: 5 GHz Band Antennas Installation
- Page 13 of 22 -
All contents are Copyright © 2007 GO Networks, Inc. All rights reserved.