User Manual

6. For wall mounting:

a) Fasten the wall/poll bracket [A] to the wall using four 3/16”

(5mm) bolts, as shown in Figure 3. Use the appropriate bolts

and fasteners, which is dependent on the material of the wall.

Wall-mounting bolts and fasteners are not supplied with the

mounting kit.

b) Place the wall/poll bracket [A] at the appropriate location

where you wish to place the unit. Using the four holes at the

corners of the bracket, mark the location where the fasteners

need to be installed.

c) Install the four fasteners in the wall.

d) Insert the four bolts through the bracket and securely fasten

the bracket to the wall.

Wall Mounting Holes

Figure 3: Bracket Wall Mounting

Mounting the MBW 510

To mount the MBW 510 unit:

1. After assembling the brackets, mount the MBW 510 unit on to the

bracket as shown in Figure 4. Use a flat washer [G], a spring washer

[H] and a nut [I].

- Page 11 of 22 -