User Manual

- Page 8 of 22 -
All contents are Copyright © 2007 GO Networks, Inc. All rights reserved.
Item
No.
Description Qty Picture
H Spring Washer M8 4
I Nut M8 1
Table 2: Mounting Kit Part List
Hardware and Connectors Installation Tools
The following tools are required to mount the MBW 510 on a pole.
Description Picture
Combination Wrench (13 mm)
13 mm
Level
Table 3: Mounting Tools and Equipment
Note: All hardware and tools used for assembling and mounting the
MBW 510 are Metric.
To assemble the ‘L’ adaptor [C] to the MBW 510 unit:
Attach the ‘L’ adapter to the MBW 510 using an M8 x25 hex bolt [E],
a spring washer [H], and a flat washer [G], as illustrated in Figure 1.