User's Manual

- Page 19 of 24 -

3. Insert the Auxiliary Power Adapter in the socket of the photocell.

Note that one prong is larger than the other two. Align the larger

prong on the adapter with the larger slot in the socket. Insert the

Auxiliary Power Adapter into the socket and rotate the adapter

clockwise.

4. Insert the photocell into the Auxiliary Power Adapter. Align the

larger prong on the photocell with the larger slot in the socket on

top of the adapter. Insert the photocell into the socket and rotate

the photocell clockwise.

5. Connect the Auxiliary Power Adapter cable to the power connector

socket on the MBW 1100 (WLP).

6. After connecting the power, verify that the Power (PWR) LED is lit.

7. Check the photocell. Cover the photocell and verify that the

streetlight operates.

*** Please add the power connector pin description for long cable

assembly ***

Console Connection

Figure 12 illustrates the RS-232 cable connections used to connect the

MBW 1100 (WLP) to a console (notebook computer to configure the MBW

1100 (WLP)). For more information regarding the serial cable, see

Appendix B: Wiring Specifications.

Figure 12: Connect and Access the MBW 1100 (WLP)

Note: New laptops may not include an RS-232 serial port. If a serial port is

not available, you may use a USB to serial converter.

Notebook PC

Consol Port:

RS232

WLP

RS232