User's Manual

- Page 12 of 24 -
All contents are Copyright © 2007 GO Networks, Inc. All rights reserved.
Mounting the MBW 1100 (WLP)
To mount the MBW 1100 (WLP) unit:
1. After assembling the brackets, mount the MBW 1100 (WLP) unit on
to the bracket as shown in Figure 4. Use a flat washer [F], a spring
washer [G] and a nut [H].
WLP Unit
Bolt
Flat Washer
Nut
Spring Washer
Figure 4: MBW 1100 (WLP) Unit Mounting
2. Once the MBW 1100 (WLP) unit is mounted, release the bolts
slightly and align the MBW 1100 (WLP) unit horizontally using the
level, as shown in Figure 5. When the unit is perfectly aligned, firmly
close all bolts, applying 120 inch-lbs of torque.
Figure 5: Aligning the MBW 1100 (WLP)