User's Manual

- Page 9 of 24 -
All contents are Copyright © 2007 GO Networks, Inc. All rights reserved.
"L" Adapter
Hex Bolt
Flat Washer
Spring Washer
Figure 1: Mount ‘L’ Assembly
Mounting Brackets
To secure the mounting brackets:
1. Select an optimal mounting location on the pole. Select the highest
mounting location with minimal obstacles to the antennas for
optimal performance.
NOTE: When mounting the MBW 1100 (WLP), the pole or wall
mounting must support a minimum of 61.6 lbs (28 kg).
In addition, the pole or wall mounting must support the
wind loads from the MBW 1100 (WLP), e.g., 24.2 lbs
(11 kg) for wind velocity of 100 mph (160 km/h),
66.1 lbs (30 kg) for wind velocity of 165 mph
(264km/h).
Noter: Lorsque vous montez la MBW 1100 (WLP), le poteau ou
le montage mural doit supporter d'un minimum de 61.6
lbs (28 kg). En outre, le montage sur le poteau ou sur
le mur doit appuyer les surcharges dues au vent de la
MBW 1100 (WLP)(par exemple, 24.2 lbs (11 kg) pour la
vitesse du vent de 100 mph (160 km/h),66.1 lb (30 kg)
pour l'énergie éolienne Vitesse de 165 mph
(264 km/h)).
2. Installation of the mounting brackets to a streetlight arm or a pole
differs according to the width of the pole, as illustrated in Figure 2.