Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Remote Operation: Remote control functions include on/off button, and a toggle switch which control up, down, left and right movement. The
light will continue movement as long as the buttons are pressed. Releasing the buttons stops movement and holds the Golight in position. A fast
and slow mode button (turtle/hare) controls the speed of the motor while the pan and tilt function buttons are depressed. Holding the button for
12 seconds in fast mode results in a full 370 degree rotation, and 8 seconds for full tilt. Slow mode is used for pinpoint accuracy at distance and
is approximately 35 seconds for full rotation and 20 seconds for one full range of tilt.
Durability: The GL-30204 LED Golight Stryker is designed for hunting and demanding outdoor use with a weather resistant housing
constructed of high quality ASA Luran thermoplastic that is heat resistant, impact resistant, UV resistant and able to withstand rugged use and
abusive conditions. This particular Golight Stryker has a durable white finish, making it ideal for docks and buildings where an attractive
appearance is desired. Remote movement of this spotlight is provided by an automotive grade internal motor, gear, and transmission assembly
that is constructed of LEXAN, brass, and stainless steel to provide rust and corrosion resistance as well as long life and reliable operation.
Mounting: The light is permanently mounted. The outer rubber cover of the remote can be removed so that the rear mounting plate can be
attached to a mounting surface with four screws. The remote requires that a 2 inch hole be drilled in the mounting surface to accommodate the
rear portion of the controller and wiring harness. The rear "shaft" of the mount, in combination with the base plate secures the remote. A 20 foot
harness is included. A joystick is provided to enable the operator to move the light in all directions. An on/off button and a separate fast and
slow button are positioned on the remote for ease of reach and operation.
Power: This light operates with 12 volts DC and draws 3 amps, making it ideal for vehicles, boats, ATVs, and similar sources of 12 volt direct
current. It is equipped with a 1 foot pigtail. Operator must provide wiring (16 AWG) from battery and/or fuse box to the light. Dash mount remote
connects to light via 20 foot harness (included).
Light Output: The lamp in this Golight Stryker is a 36 watt LED bulb which produces 2,520 lumens. This bulb is paired with a tight focus spot
beam optics to produce a spot beam 900 feet in length. This lamp has a 6000K color temperature, giving it very good color rendering and
contrasting properties and the ability to clearly and sharply illuminate objects at long distances. This beam is effective to the far end of its reach,
producing enough illumination to read a book at 900 feet.
This high power LED Golight Stryker is ideal for hunting, security, boating, law enforcement, emergency services, utilities,
and anywhere high power and remote control functionality are desired. This unit produces a more powerful and far
reaching beam than halogen spotlights and uses less power on a 12 volt system, making it well suited to vehicles and
boats where power supply is limited.
Golight Stryker Features Superior LED Benefits
1.Weather Proof Lamp and Remote Control.
2. Remote Control Programmable with More than 60,000 Possible
Channels. Remotes Can be Programmed to Control One Golight or
Several
3. R.F. Frequency, F.C.C., S.A.E. tested and Canada Certified.
4.Remote Control Range up to 100 Feet.
5. Automotive Grade 12 Volt D.C. High Torque Motor.
6. Weatherproof Connectors Meet OEM Vehicle Manufacturer
Specifications
7. Meets Marine Standards for Fresh Water and Saltwater Use.
8. 2,520 Lumens, 900 Foot Beal Length
9. 12 Volt DC 3 amps Draw.
1. 50,000 hour lifespan.
2. Higher Color Temperature with Better Color Rendering and Contrasting.
3. More Durable than Halogen. No Filament to Burn Out or Break.
4. High Efficiency, More Light with Less Power Drain.
5. Vibration Resistant
6. High Output.
7. Can SAVE 50% or more on energy.
8. No toxins-lead or mercury
9.Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Less frequent outages, higher output improves workplace safety.