Quick Start Guide

1
2
Launch the GoKittyCat app. Then press
the connect button located on the bottom
of Mousy. The green light will illuminate.
Then press the connect button on the
GoKittyCat app.
3
4
Mousy is charged using the microUSB
port located on the bottom. Any USB
charger can be used with the supplied
cable. When charging, the red light will
pulse slowly. The green led will turn off
when charging is complete. Mousy ships
fully charged.
To add a tail to Mousy simply clip or
tie it to the provide loop on the rear
of Mousy.
Mousy Quick Start Guide
5
6
GoKittyCat.com
33175 Temecula Parkway,
Suite A-630, Temecula, CA 92592
T: [phone]
F: [phone]
[e-mail]
Install the GoKittyCat app. The app can
be located by searching for “GoKittyCat”
without the quotes and with no spaces.
Mousy will run in auto mode when turned
on and no connection to the GoKittyCat
app is found. In auto mode Mousy will
move randomly until an obstacle stops it.
Mousy will then randomly change its
direction
Once connected a timer for auto play
can be set. Mousy will turn off once the
timer runs out. Mousy can be manually
controlled by selecting Manual Control.