Quick Start Guide

1
2
Install the GoKittyCat app. The app can
be located by searching for “GoKittyCat”
without the quotes and with no spaces.
Launch the GoKittyCat app. Then press
the power button labeled PWR. The
red power light will illuminate. The app
will detect MagicDot.
3
4
Install 4 x AAA batteries. The battery
door will require a butter knife or flat
screw driver to open.
The MagicDot includes 7 patterns
plus a random feature. Pressing the
PATTERN button will change the laser
drawing pattern.
MagicDot Quick Start Guide
If MagicDot is placed at ground level
adjust the beam UP by pressing the UP
button. If placed on a table adjust beam
down by pressing the DOWN button.
5
6
The laser beam’s brightness and speed
can be controlled from within the app.
MagicDot can also be manually controlled
or setup to run on a timmer from the app.
AAA AAA AAA AAA
GoKittyCat.com
33175 Temecula Parkway,
Suite A-630, Temecula, CA 92592
T: [phone]
F: [phone]
[e-mail]