User Manual

• Step 3: Wiring the floodlight cam

1) Use a wire nut (F) to connect the white wires together. The white wire on Floodlight

Cam is a neutral wire.

2) Use a wire nut (F) to connect the black wires together. The black wire on Floodlight

Cam is a hot wire.

3) Connect the ground wire from the junction box of the ground screw (D, green) on the

metal crossbar (A).

Then wire as below

Remove the paper barrier from the EVA gasket (B), and adhere the gasket to the

crossbar and outer edge of the round surface junction box.

Ensure that the short screw on the crossbar is threading the hole of EVA gasket (B).

• Step 4: Mounting the floodlight cam

Make sure wire connections are secure. Carefully align wires into junction box.

Mount the Floodlight Cam onto the crossbar(A) and secure with the Nut(E) , DO NOT

over tightening.

White Black