User Manual

• Step 1: Shut power off at the breaker (not the switch)
• Step 2: Mounting crossbar
1) Please make sure the power voltage is 110-120V AC, 60 Hz.
2) Fix the ground fixture properly.
3) Always follow code standards when installing wired connections.
4) Do not connect this light fixture to a dimmer switch or timer.
5) Do not install near combustible or flammable surfaces.
Attach crossbar (A) to junction box (not included) with two long screws (C).
Ensure that the screw thread on the center hole is pointing away from the surface.
You Can Install the Floodlight Cam Follow These Steps:
Floodlight Cam must be installed on a wall and on a UL listed junction box.
Notice
WARNING:
Risk of electrical shock!
Screws (C)
Screws (C)
Crossbar (A)