User Manual

11 Enhanced features (for Bluetooth phones with
hands-free profiles)
Enhanced features are available for phones that support the hands-free
Bluetooth profile. Check your phone’s instruction guide or contact the phone
manufacturer if you are not sure if your phone supports the hands-free Bluetooth
profile.
You can enable these enhanced features by using the following alternative
pairing sequence.
“Pairing” to a Bluetooth phone with hands-free profile:
1. Ensure headset is off (see Turning headset on/off section).
2. Press and hold
plus the volume up button until you see a solid
blue light (approximately 8 seconds), then release (see Fig. 5).
3. Set your Bluetooth phone to “discover” the headset by following your
phone’s instruction guide. Typically, the steps involve going to a “setup”,
“connect”, or “Bluetooth” menu on your phone and then selecting the
option to “discover” a Bluetooth device*.
4. Your phone will find the “Corona III” headset and ask if you want to pair
with it. Confirm this by pressing “yes” or “ok”.
5. Enter passkey or PIN = 0000 (4 zeros), then press “yes” or “ok”.
Fig. 6
Fig. 7
*