Corona III – Samsung to provide Commercial product name Bluetooth Headset User Manual The Multi function button on the headset is in this draft manual presented by the symbol . The final symbol is to be determined by Samsung. English Thank you 1. Check phone compatibility 2. Charge Corona III 3. Read the glossary 4. “Pair” to your Bluetooth® phone 5. Turning headset on/off 6. Choosing wearing preference 7. Making a call 8. Ending a call 9. Answering a call 10. Call-waiting 11.
Thank you Thank you for purchasing the Corona III Bluetooth® Headset, we hope you will be delighted with its operation. Please read the instruction manual to get started and to make best use of the headset’s many features. ! Drive safely Using a mobile phone while driving creates a distraction to the driver which may increase the likelihood of an accident. When using the phone while driving, keep conversations short and do not make notes or read documents.
Corona III Overview 1 2 3 4 Blue Indicator Light Multi-Function Button Volume Control Button Charging socket Fig 1. STOP: BEFORE USING YOUR HEADSET 1 Check phone compatibility The Corona III is compatible with most Bluetooth1 (see Glossary) phones that are compliant with Bluetooth version 1.1 or higher specification and support the headset and/or hands-free profile(s)2. Ensure that your phone has Bluetooth capability by either visiting your phone manufacturer’s web site or Samsung web site at www.
2 Charge Corona III Corona III uses a rechargeable battery that must be charged fully before you use the headset for the first time. 1. 2. 3. 5. Plug the Corona III AC charging adaptor into the headset’s charging socket. Plug the AC adaptor into the electrical outlet. Charge your headset until the red light turns to green light on Corona III . The unit will be fully charged in approximately 2 hours. Remove the headset from the AC charging adaptor .
3 Read the glossary Read the glossary at the end of this document to familiarize yourself with important terms used in this User Manual. Once Corona III is fully charged, continue with these instructions. 4 “Pair” to your Bluetooth phone Pairing3 will create a unique and encrypted wireless link between two Bluetooth enabled devices such as your Bluetooth phone and Corona III. 1. 2. 3. 4. 5. Fig. 3 Fig. 4 Ensure the headset is off (see Turning headset on/off section).
! IMPORTANT: If pairing was successful, the blue indicator light will flash 10 times rapidly before going back to flashing every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to reattempt pairing (see steps 3–5 above). * If you have a Bluetooth phone that supports the hands-free Bluetooth profile, see Enhanced features section for alternative pairing instructions. Phone-specific pairing instructions can be found online at www.samsung.
Status indicators What you see Flashes every 8 second Flashes every 3 seconds Red flash instead of Blue What you hear Quick series of 4 tones – (when active mode starts) Status Active Mode5 • Call in progress • Up to 8 hours of talk-time* Quick series of 4 tones – Standby Mode6 (when standby mode • Waiting for call starts) • Up to 240 hours of standby time* 5 tones every 20 seconds Low Battery • 3 – 5 minutes of talk time left * Depending on phone type and usage.
6 Choosing wearing preference Corona III is ready to wear on the right ear. If you prefer the left, gently rotate the ear hook. For optimal performance, wear Corona III and your Bluetooth phone on the same side of your body. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone. Fig. 5 7 Making a call If Corona III is off, turn it on now (see Turning headset on/off section). Using phone’s keypad 1. Dial number on keypad.
8 Ending a call • • Press and release once OR End call from phone’s keypad
9 Answering a call • • once After you hear the ring tone, press and release OR Answer the call with your phone’s keypad.
Enhanced features (for Bluetooth phones with hands-free profiles) Enhanced features are available for phones that support the hands-free Bluetooth profile. Check your phone’s instruction guide or contact the phone manufacturer if you are not sure if your phone supports the hands-free Bluetooth profile. You can enable these enhanced features by using the following alternative pairing sequence. “Pairing” to a Bluetooth phone with hands-free profile: 1. 2. 3. 4. 5. Fig. 6 Fig.
! IMPORTANT: If pairing was successful, the blue indicator will flash 10 times rapidly before going back to flashing every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to reattempt pairing (see steps 3–5 above). Once you’re done pairing, the following new headset features will be available: • • Last number redial (when not on a call) While the headset is on, press and hold Rejecting an incoming call (when not on a call) When your phone rings, long press and hold release. release.
12 Frequently asked questions 1. How far away from my phone will my Corona III work? The operating range is typically up to 30 feet (10 metres). 1. Will Corona III work with my cordless phone at home? Corona III is not designed for use with cordless phones. 2. Will Corona III work with laptops, PCs, and PDAs? Corona III will work with devices that are compliant with Bluetooth version 1.1 or higher specifications and support the headset and/or hands-free profile(s). 3.
2. E-mail and telephone support: See back inside cover for customer service support telephone numbers and e-mail. 14 Storage of headset 1. Always store the Corona III with power off and safely protected. 2. Avoid storage at high temperatures (above 60°C / 134°F) – such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can degrade performance and reduce battery life). 3. Do not expose the headset or any of its supplied parts to rain or other liquids.
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
2 Bluetooth profiles are protocols through which Bluetooth devices communicate with other devices. Bluetooth phones support different sets of profiles – most support the headset profile but some support the handsfree profile and others support both profiles. In order to support a certain profile, a phone manufacturer has to implement certain mandatory features within the phone’s software.
