User Manual

8
English
9
English
7. Features
2)
Important: If headset is out of range for more than 1 min., the link between base and headset will be
terminated.
7.1 Set Ringer Tone by setting the
switch in 1 of 3 settings OFF, LOW.
High.
Low battery
7.2 App. 10 minutes before the
headset runs out of battery, the
visual indicator on headset will
start to flash with a red light and a
series of tones will be heard.
If the battery runs out of power,
visual indicator on headset will
switch off automatically. Replace
headset to charge cradle, and
continue the call using telephone
handset.
Out of range
7.3 If going out of range (approx.
10 meters/30 feet), all buttons
except answer/end button will
stop working until back in range
again.
2)
If headset is muted when going
out of range it will also be muted
when going within range again.
Features:
Range 10m/30feet
Talk time / standby time 4 hours / up to 60 hours
Transmission protocol
Bluetooth
Frequency band 2,4 GHz
10m/30feet
10 min
7.3
7.2
8.1
8.2
8.3
8. Reset / Pairing
8.1 Remove snap-on cover. Press
resetbuttononheadsetfor3sec.
Visual indicator on headset will
flash red/green rapidly.
1)
8.2 Then press reset button
on base unit for 3 sec. Visual
indicator on base unit will flash
red/green rapidly.
8.3 Make sure headset and base
are within 1 meter/3 feet of each
other. When pairing is successful,
both visual indicators will flash
green 10 times, and the visual
indicator on base unit will turn to
steady green.
1)
Note: The headset is already paired with the base unit from the factory. Pairing should only be necessary if
a new headset has to work with an existing base unit (or vice versa).
~
3 sec
~
3 sec
1m/3feet
8. Reset / Pairing
7.1