User's Manual

answered by pressing the Function Button momentarily. (The Incoming Call Alert is 1 second of 700
Hz Warble Tone.)
4. To adjust the Receive Volume Up, momentarily press the upper end of the rocker switch one or more
times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the max volume is
reached.
5. To adjust the Receive Volume Down, momentarily press the lower end of the rocker switch one or
more times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the min
volume is reached.
IV Making an Outgoing Connection
1. If the headset is powered up, dialing can be done from the cell phone or by Voice Dialing if available
2. If the headset is in the “Sniff Mode” press the Function Button for more than 2 seconds and release.
Dialing can be done from the cell phone or by Voice Dialing if available.
VI Other Functions
1. Microphone Mute can be accomplished while on a call by momentarily pressing the Function Button
to mute and un-mute. When the microphone is muted, two 150 millisecond 2 kHz beeps are heard in
the receiver every 15 seconds.
2. Low Battery Warning is indicated by five 50 millisecond 2 kHz beeps in the receiver every 20 seconds.
3. Out of Range is indicated by deterioration of audio quality (noisy signal) in the receiver.
4. Power ON/OFF is accomplished by opening and closing the microphone boom.
VII Storage
1. Always store with microphone boom closed (Power OFF) and in a cloth or plastic bag to keep dust and
lint out of microphone and speaker openings.
2. Avoid storage at high temperatures (above 60 C or 134 F), such as in a hot vehicle in direct sunlight.
Storage at high temperatures can degrade performance and reduce battery life.
3. Do not expose headset to rain or other liquids.
VIII Parts Replacement
1. Battery: This product is equipped with a Lithium Rechargeable Battery. Replacement must be done at
a qualified service center or returned to the manufacturer. Use only P/N xxxxxx battery
2. AC Charger: Use only P/N xxxxxx
3. Vehicular Charger: Use only P/N xxxxxx
IX Certification and Safety Approvals for Series 9200 Bluetooth Wireless Headset