SERIES 9200 BLUETOOTH WIRELESS HEADSET USERS MANUAL (July 2001, Preliminary) GN Netcom Inc 77 Northeastern Blvd. Nashua N.H.
Series 9200 Bluetooth Wireless Headset Introduction The Series 9200 Headset is a lightweight “over the ear” wireless headset utilizing Bluetooth technology in the 2.4 GHz band for a short range (up to 10 meters) RF link. The headset contains a microphone and a receiver, and is intended for hands free communications with mobile telephones containing Bluetooth compatibility or any other device that has a Bluetooth Audio Gateway. Headset power is provided by a rechargeable battery.
I Series 9200 Bluetooth Headset Operation---Preliminary 1. The battery must be charged before using. 2. To charge battery plug charger connector into rectangular Charge Jack located on edge of housing opposite microphone boom hinge. (Note that the headset is not functional while charging and the microphone boom can be open or closed). Select 4-hour charge rate on charger and charge battery.
answered by pressing the Function Button momentarily. (The Incoming Call Alert is 1 second of 700 Hz Warble Tone.) 4. 5. To adjust the Receive Volume Up, momentarily press the upper end of the rocker switch one or more times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the max volume is reached. To adjust the Receive Volume Down, momentarily press the lower end of the rocker switch one or more times until the desired level is achieved.
1. FCC: This product has been tested to comply with FCC Standards and is For Home or Office Use. This product complies with FCC Part 15 as a Class B Computing Device. The FCC I.D. is xxxxxx 2. UL: This product is UL Listed ITE and complies with UL 60950, Canada and US. The UL File Number is E210538. Note: A label with essential FCC and UL information is located in the battery compartment. FCC Notice to Users This device complies with part 15 of the FCC Rules.
Unless otherwise instructed in the User Guide, the user may not, under any circumstances, attempt to perform service, adjustments or repairs on this unit, whether in or out of warranty. It must be returned to the factory or authorized service agency for all such work. To Obtain Service For customer service and technical support, call GN Netcom, Inc.
