User's Manual

Pair new
device
’Call from
John Smith’
’Ignore’
’Answer’
EN
complete you will hear ”Connected”. You are now ready
to start using your Jabra SUPREME.
NOTE: If asked for a passcode or key use 0000 (four zeros).
PAIR A NEW OR SECOND DEVICE
1. Ensure that the Jabra SUPREME is turned on
2. Tap the Voice Control button. You will be asked to
”Say a command”.
3. Say ”Pair new device” and follow the instructions.
4. If this is your second device you will need to reconnect to the first device afterwards
Note: If you have disabled Voice Guidance and Control you can put Jabra SUPREME in pairing mode
manually by holding the Answer/end button while flipping the boom arm to ON position. The Status
Display will flash blue to indicate that you are in pairing mode.
USING YOUR JABRA SUPREME
ANSWER CALLS
When you have an incoming call, wait for Jabra SUPREME to an-
nounce the caller. Say ”Answer” to accept ,or ”Ignore” to reject the
call. Additionally, you can tap the Answer/end button to answer, or
double tap to reject the call. If Jabra SUPREME is off (flipped) you
can take a call by flipping open and Jabra SUPREME connects and
answers the call.
MAKE CALLS
Tap the Voice Control button and you will be prompted to ”Say a
command”. You can:
• Say ”Redial” to redial the last outgoing call.
• Say”Callback”tocallbackthelastincomingcall.
• Say”Phonecommands”toactivatethevoicedialingfeatureonyourphone*
You can also place a call directly from your phone. If your phone is connected it will automatically transfer
thecalltoyourJabraSUPREME*.Ifthecalldoesnottransfer,taptheAnswer/end button.