User Manual

EN
* Phone dependent
5.1 Put the headset in pairing mode
a First time pairing
Turn on the headset and the Jabra CLIPPER will automatically enter
pairing mode (indicator light is solid blue) and start searching for a
device.
b Later pairing
Starting with the unit turned o, press and hold the Multi-Function
button until the indicator light is solid blue (approximately 6 seconds).
5.2 Set your Bluetooth® phone or device to search for the Jabra CLIPPER
Follow your phone’s instruction guide. First make sure that Bluetooth® is
activated on your mobile phone. Then set your phone to search for the
headset. This usually involves going to a ‘setup,’ ‘ connect’ or Bluetooth®
menu on your phone and selecting the option to search for or ‘add’ a
Bluetooth® device.*
5.3 Your phone will nd the Jabra CLIPPER
The phone will nd the headset under name “Jabra CLIPPER”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with the
passkey or PIN = 0000 (4 zeros) if required.
Your phone will conrm when pairing is complete.