User Manual
5
english
JABRA BT650s
PAIRING YOUR JABRA BT650s TO A PHONE OR
OTHER DEVICE
Headsets are connected to phones or other Bluetooth devices
using a procedure called ‘pairing’. By following a few simple steps,
pairing can be done in a matter of seconds..
1. Put the headset in pairing mode
1.a. First time pairing
- Fold and Unfold the headset and the Jabra BT650s will auto-
matically enter pairing mode (indicator light (5) is solid blue)
and start searching for a device.
1.b. Later pairing
- Press and hold the Answer/End button (1) until the indicator
light (5) is solid blue (approximately 4 seconds).
2. Set your Bluetooth phone or device to search for the Jabra
BT650s
- Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to search for the headset. This usually involves going
to a ‘setup,’ ‘ connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to search for or ‘add’ a Bluetooth device.*
3. Your phone will nd the Jabra BT650s
- The phone will nd the headset under name “Jabra BT650s”.
- Your phone then asks if you want to pair with the headset.
- Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with
the passkey or PIN = 0000 (4 zeros). Your phone will conrm
when pairing is complete.
WEARING STYLE
Please note the left/right wearing indicators inside the headband.
Alternatively always wear the Jabra BT650s with the Answer/end
button on you right.
Adapt the size of your Jabra BT650s by extending the length of
the headband.
* Refer to phone’s user manual