User's Manual

6
ENgLiSh
JABRA BT3010 BLUETOOTH HEADSET
2. Set your Bluetooth phone to ‘discover’ the Jabra BT3010
• Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and select-
ing the option to ‘discover’ or ‘add’ a Bluetooth device.*
3. Your phone will nd the Jabra BT3010
• Your phone will nd the headset under name “Bluetooth head
-
set”. Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with
the passkey or PIN = 0000 (zeros). Your phone will conrm
when pairing is complete.
Fig. 4
Connectivity
MobilSurf
Bluetooth
Infrared port
WAP options
Synchronization
Networks
Select Info
Handsfree
Ok
Bluetooth headset
Added. The
handsfree is now
ready for use
Devices found
Select
Bluetooth headset
Ok
Passkey:
JABRA BT3010
In case of unsuccessful pairing, put the Jabra BT3010 into pairing
mode manually. Make sure the headset is o. Press and hold the
answer/end button for approximately 5 seconds until the LED has
a constant light.The LED will ash before the light is constant –
keep holding down the button until light is constant
.
1 2
* Phone dependent