User's Manual
10
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
11
Jabra BT3010 Bluetooth headset
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
* Functions marked with * are dependent on your phone supporting these
features. Check your phone’s user manual for further information.
10. What the lights mean
What you see What is the mean about your headset
Solid light: In pairing mode – see Pairing section
Slow single ash: Connected to phone and in standby mode*
Slow double ash: Not connected to phone and standby mode*
Quick single ash: Active on call
Quick double ash: Incoming/Outgoing call
Triple ash: Battery low
* BT3010 is equipped with Jabra Discreet Light feature, meaning that
light indicator (LED) turns o after 1 min of non-activity. Headset is still
active, and light will ash again after a tap on the answer/end button
or any call activity.
11. Troubleshooting & FAQ
I hear crackling noises
• For the best audio quality, always wear your headset on the same side
of the body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not
connect either from the phone’s Bluetooth menu or by tapping the
answer/end button, follow the pairing procedure (refer to pairing
section in this user manual).
• You can determine whether your headset is connected to a device by
looking at the ashes on the headset after tapping the answer/end
button when the headset is on: single slow ashes means that the
headset is connected to a device, double slow ashes means that the
headset is currently not connected.
I have connection problems
• You may have deleted your headset pairing connection in your mobile
phone. Follow the pairing instructions; refer to this section in this user
manual.
• You can determine whether your headset is connected to a device by
looking at the ashes on the headset after tapping the answer/end
button when the headset is on: single slow ashes means that the
headset is connected to a device, double slow ashes means that the
headset is currently not connected.
Will the Jabra BT3010 work with other Bluetooth equipment?
• The Jabra BT3010 is designed to work with Bluetooth mobile phones.
It can also work with other Bluetooth devices that are compliant with
Bluetooth version 1.1, 1.2 or 2.0 and support a headset and/or hands-
free Bluetooth prole.
I cannot use Reject call, Call on hold, Redial or Voice dialling
• These functions are dependent on your phone supporting them.
Please check your phone’s manual for further details.
12. Need more help?
Jabra oers Customer Support online at www.jabra.com or you can see the
cover of the quick start guide for your country’s support details.
13. Taking care of your headset
Always store the Jabra BT3010 with the power o and safely protected.
Avoid storage at extreme temperatures (above 45°C/113°F – including
direct sunlight – or below -10°C/14°F). This can shorten battery life and
may aect operation.
High temperatures may also degrade performance. If exposed to water or
other liquids, the device should be wiped clean from any traces of water.
14. Protect your hearing
Warnings
Headsets are capable of delivering sounds at loud volumes and high pitched
tones. Exposure to such sounds can result in permanent hearing loss
damage. The volume level may vary based on conditions such as the phone
you areusing, its reception and volume settings, and the environment.
Please read the safety guidelines below prior to using this headset.
Safety guidelines
1. Prior to using this product follow these steps:
• before putting on the headset, turn the volume control to its lowest
level,
• put the headset on, and then
• slowly adjust the volume control to a comfortable level.
2. During the use of this product
• Keep the volume at the lowest level possible and avoid using the
headset in noisy environments where you may be inclined to turn up
the volume;
• If increased volume is necessary, adjust the volume control slowly;
and