User's Manual

6
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
7
Jabra BT3010 Bluetooth headset
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
The Jabra BT3010 is easy to operate. The answer/end button on the headset
performs dierent functions depending on how long you press it.
Instruction: Duration of press
Tap Press briey
Press Approx: 1 second
Press and hold Approx: 5 seconds
5. Charge your headset
Make sure that your headset is fully charged for 2 hours before you start
using it. Use the AC power supply to charge from a power socket. When the
light indicator (LED) has a solid LED light, your headset is charging. When
the solid LED light turns o, it is fully charged. (See g 3)
1 2
Use only the charger provided in the box - do not user chargers from any
other devices as this may damage your headset.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
6. Turning your headset on and o
• Press the answer/end button until you see a burst of ashes on the
indicator light (LED) to turn on your headset.
• Press and hold the answer/end button until you see a burst of ashes
on the indicator light (LED) to turn the headset o.
Please note that the LED indicator light turns o after 1 minute to save
battery. Headset is still active, and light will ash again after tap on the
Answer/End button or any call activity. To check if the headset is on,
tap the answer/end button once – the LED indicator light will ash, if the
headset is on.
7. Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pairing’. By
following a few simple steps, a phone can be paired with a headset in a
matter of minutes. ( See g 4)
1. Put the headset in pairing mode
• When you turn on your Jabra BT3010 for the rst time, the headset will
automatically start up on pairing mode – i.e. it is discoverable for your
phone. When the headset is in pairing mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT3010
• Follow your phone’s instruction guide. First make sure that Bluetooth is
activated on your mobile phone. Then set your phone to discover the
headset. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to ‘discover’ or ‘add’ a
Bluetooth device.*
3. Your phone will nd the Jabra BT3010
• Your phone will nd the headset under name “Bluetooth headset”.
Your phone then asks if you want to pair with the headset. Accept by
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the passkey or PIN
= 0000 (4 zeros). Your phone will conrm when pairing is complete.
In case of unsuccessful pairing, put the Jabra BT3010 into pairing mode
manually. Make sure the headset is o. Press and hold the answer/end
button for approximately 5 seconds until the LED has a constant light.The
LED will ash before the light is constant – keep holding down the button
until light is constan
1 2
g 4
g 3