Owner's Manual

is ideal for most users. However, if you experience interference from other communication

devices during your calls, you may want to switch to the Low or Very Low modes. Changing to

Low or Very Low power modes will reduce the range of your headset.

Power mode Range* DECT Range* US DECT

Normal Up to 100 m Up to 300 ft

Low Up to 50 m Up to 150 ft

Very Low (V. low) Up to 20 m Up to 60 ft

* In typical ofﬁ ce environment

Note: The Normal power mode is the default setting.

To change the range/power mode:

1. Use

to locate the range/power mode menu on base display.

2. Use

to select one of the 3 modes from the menu.

3. Press OK to conﬁ rm the new mode.

2.5.4 Sound mode selection

This menu is split into two sections: “Treble/Normal/Bass” and “Fixed/Switch”. These two

sections are separated by a blank line. It is possible to choose one mode in each of the two

sections.

Your headset offers 3 treble/bass modes (Treble, Normal and Bass). You can change these to

suit your personal preferences or needs, and seperately determine the USB sound quality.

Sound mode Effect Beneﬁ ts

Treble Accentuates high tones Ideal for users with slight high-

frequency hearing loss

Normal Accentuates all tones evenly Ideal for all users

Bass Accentuates lower tones Ideal for users preferring a bass-

rich sound

Note: The Normal mode is the default setting.

Sound mode Effect Beneﬁ ts

Fixed Speech quality in headset loudspeaker as known

from traditional telephones (narrowband)

Improved talk time in USB mode

Switch Automatically switches between wideband or

narrowband sound quality. In conference call

mode, automatic switching is disabled.

Enhanced USB sound quality