1. Install a fresh AAA battery in the battery compartment on the back of the GN 7100. 3. Connect the telephone line cord. Run it through the telephone stabilizer and plug it into an active phone jack.
Placing A Call Pour Établir une Communication Para Hacer una Llamada Para Fazer uma Chamada 1. Put on your headset. Mettre le micro-casque. Colóquese el casco auricular. Coloque o Conjunto Fone de Ouvido/Microfone na cabeça. 2. Press the On/Off button. The on-line indicator lights and you will hear a dial tone. Appuyer sur la touche Marche/Arrêt. Le voyant indicateur de poste en ligne s’allume et l’on entend la tonalité. Presione el botón On/Off.
Dialing Stored Telephone Numbers Using Speed Dial To automatically dial a telephone number stored in one of the three One-Touch Speed Dial locations, place the GN 7100 on-line by pressing the On/Off button and press the M1, M2, or M3 button to automatically dial the corresponding telephone number. Replacing The Battery Pour Changer la Batterie Para Reemplazar la Batería Substituição da Pilha The low battery indicator in the display illuminates when the battery requires replacement.
Frequently Asked Questions Preguntas Frecuentes Why can't I hear a dial tone while wearing my headset? ¿Por qué no puedo oír un tono de discar cuando tengo puesto mi casco auricular? • • Make sure the GN 7100 is connected to an active telephone jack. Make sure your headset is connected to the Quick Disconnect connector on the GN 7100. Make sure the GN 7100 is on-line by pressing the On/Off button and checking to see that the on-line indicator is lit.
