motorola.
Welcome DR The Motorola HT820 Bluetooth Stereo Headset makes connectivity invisible and reliable. It is astonishingly advanced and simple to use. AF Motorola is actively creating Bluetooth ® solutions for work, play, home, and life everywhere around the globe.
DR Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. The use of wireless devices and their accessories may be prohibited or restricted in certain areas.
Contents DR AF Safety and General Information . . . 4 Introduction. . . . . . . . . . . . . . . . . . . 10 Headset Features . . . . . . . . . . . . . 10 Using Your Headset . . . . . . . . . . . . 13 Pairing Your Headset and Phone . . 16 Wearing Your Headset. . . . . . . . . . 20 Controlling Headset Volume . . . . . 21 Making and Receiving Calls. . . . . . 21 Music Controls . . . . . . . . . . . . . . . 26 Headset Indicators . . . . . . . . . . . . 30 Audio Tones. . . . . . . . . . . . . . . . . .
DR Safety and General Information AF IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. T Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules.
DR following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). Electromagnetic Interference/Compatibility AF Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
DR notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external radio frequency (RF) energy. Aircraft AF When instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions. Medical Devices T Hearing Aids Some devices may interfere with some hearing aids.
DR device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Industry Canada Notice to Users AF Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. See Ref IC: RSS 210 Sec. 5.11.
DR met. It does not imply that Industry Canada approved the equipment. See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4. FCC Notice to Users AF This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DR equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. AF • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Introduction DR Headset Features 2 3 AF 4 1 Headset Music Controls (Left Side) T 1—Skip Reverse Button < Allows you to skip back to the previous music track. 2—Skip Forward Button > Allows you to skip forward to the next music track. 3—Play/Pause/Stop $ Allows you to play, pause, or stop music.
DR 4—Headset Jack Allows you to connect non Bluetooth devices to your stereo headset. 5 6 7 AF Headset Call Controls (Right Side) 5—Volume Up Button + 6—Volume Down Button 7—Multifunction Button (MFB) $ Used to answer and end calls. Also used for other phone call functions.
DR AF T 12 Introduction
DR Using Your Headset Charging Your Headset AF First-Time Use—Before you can use your headset, you need to charge its self-contained battery for two hours. Recharging—When you hear five rapid high tones through the headset speaker, repeated at 20-second intervals, the headset battery needs to be recharged. T Over time, batteries gradually wear down and require longer charging times. This is normal. The more you talk on the phone with the headset, the less standby time your battery has.
DR The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a fire because they may explode. How to Charge AF Action 1 Plug the Motorola charger into your headset.
Action DR 2 Plug the other end of the charger into an electrical outlet. While charging, the headset indicator turns on and remains on until charging is complete. The headset will not function while charging. Your headset fully charges in approximately 2 hours. AF 3 When charging is complete (indicators off), remove the charger from the electrical outlet, and detach the charger cord from the headset.
DR Note: You can also use a Motorola Original™ Vehicle Power Adapter to charge your headset while in your vehicle. A fully charged headset battery provides approximately: • Stereo music listening time – 12 hours • Phone call talk time – 15 hours AF • standby time –200 hours Pairing Your Headset and Phone T Note: You must pair your headset and phone before you can make a call.
DR wireless technology and allows the phone to remember your headset’s unique ID. After your headset and phone are paired, your headset automatically connects to your phone any time you turn it on. With your headset and phone in close proximity: Step AF 1 Put your headset into pairing mode. a With the headset off, press and hold the Multifunction Button T until the headset indicator turns on and remains on (about 6 seconds).
Step DR 2 Perform a device discovery from the phone. For details on device discovery for your phone, refer to the phone’s user’s guide. When the scan is complete, the phone displays the devices found. AF 3 Select the Motorola HT820 from the discovered devices list and confirm following the on screen prompts. 4 When prompted by the phone, enter the passkey 0000 and confirm to pair the headset with the phone. The device ID is now stored in the phone’s memory.
Paring to Additional Devices DR Use the procedure “Pairing Your Headset and Phone” on page 16 to pair your headset to a stereo music source. The music source must support streaming stereo audio over Bluetooth. AF Your headset can store pairing information for up to eight different devices that have Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in chronological order.
DR When you turn on your headset it will only automatically initiate a paired connection with the last hands free device (such as a mobile phone) and the last music source it was connected to. If you want to connect your headset to another device in the paired device list, you must initiate the connection from that device. When any one of the eight devices initiates a connection to the headset afterwards, that device then becomes the “last connected” device.
processing is used for clear pickup of your voice. DR Controlling Headset Volume Press the volume + or - button repeatedly until you reach the desired volume level. AF Making and Receiving Calls T Your headset supports both Handsfree and Headset Profiles. Accessing call functions depends on which profile your phone supports. Note: Some phones do not support all features listed. Please consult your phone user’s guide.
You can activate call functions according to the following table: DR Device Status Phone Headset Action Enter Pairing Mode: On Off AF Press & hold T (MFB) for 5 seconds until LED remains on. Release T. Make a Voice Dial Call: On in idle On Short press T, speak name, phone dials call. Dial a Number: 22 Press SEND on the phone to complete the call. T On– the On user dials a number on phone.
Device Status Action Headset DR Phone Redial a Number: On–Idle On– (Idle) Long press T On Short press T End a Call: On–in call Put Active Call On Hold: AF On–in call On Long press T Put Active Call On Hold: On–in call On Long press T Receive a Call: On– On Short press T (call is answered) T phone rings Using Your Headset 23
Device Status Headset DR Phone Action Reject a Call: On–phone rings On Long press T Answer 2nd incoming call: On Long press T, places 1st call on hold, answers incoming call AF On–in call, 2nd call coming in Toggle between two active calls: On–in call, 2nd call on hold On Long press T T 24 Using Your Headset
Device Status Headset DR Phone Action Join two calls (3-way calling): On - in call, On 2nd call on hold Press both Volume buttons simultaneously. Both calls will become active. Transfer call from phone to Headset: AF On–in call On Short press T, (call transferred to headset) T Note: If the link is abnormally disconnected (for example, out of range) the headset tries to reestablish the link.
Music Controls DR When the headset is on a phone call, the music control buttons are disabled.
Music Control Functions DR When headset is Idle: Press Result T play/pause Headset commands remote source to start playing music. short press headset controls phone functions AF T MFB When headset is playing music from a remote source: Press > Go to previous track. T < Result Go to next track.
Result T play/pause Pause music DR Press (short press play) T Stop Stop music (long press) T MFB Stop music and open a hands free connection to phone.
When music track is paused: Result < Go to previous track. > Go to next track. T play/pause (short press play) Restart music track. T Stop (Long Stop music DR Press T MFB AF press) Stop music and open a hands free connection to phone.
When headset is in a phone call and music paused: DR Press Result T MFB (end call) Phone ends call. Music play resumes. Headset Indicators AF There are two lights on the HT820, one on the left in the Multifunction Button, and one on the right in the Play/Pause/Stop button.
Headset Indicators Headset DR OFF Charging complete When no charger cord attached: Headset Indicator MFB Button ON (steady) 10 rapid flashes OFF Power off OFF Pairing mode OFF Pairing successful OFF standby (not on a call) no audio.
Headset Indicator Play Button Headset Mode Flashes every 8 seconds OFF connected (on a call) Flashes every 8 seconds Flashes Music mode every 8 seconds DR MFB Button Phone Audio AF T Note: When your wireless headset is paired to your phone and there is no activity for 5 minutes, the blue flashing LED turns off. Any button press on the headset turns on your headset and it resumes the flashing. You can disable the Headset Indicators by pressing the FF and REW buttons simultaneously.
back on by pressing the FF and REW buttons simultaneously again.
Audio Tones Headset Status One high tone when pressing volume button Volume maximum or minimum reached DR Audio Tone Low battery Five rapid high tones, repeated every 20 seconds Out of range Series of 4 tones, low to high Audio link open (Headset mode), active call (Hands Free mode) Ring tone Incoming call Single high tone Pairing confirmation AF No audio indications; deteriorating audio quality T 34 Using Your Headset
Headset Status One low tone Initiate voice activation Dual high/low tone Voice tag not recognized One high tone End call Series of 4 tones, high to low Audio link closed (Headset mode), call ended (Handsfree mode) DR Audio Tone AF Fast high/low tone No every 5 seconds network/service (max. & min.
DR Connecting To A Music Device Using The Included Stereo Audio Cable AF There is a headset jack connector on the HT820 that allows the headset to plug in to either a stereo music player or a multimedia phone. The volume buttons on the stereo headset do not control the volume of the inline audio. All volume control of the inline audio is done through the input device. T Presence of the inline stereo audio will not disable the Bluetooth link between your mobile phone and your HT820.
the HT820. When the call ends, the headset unmutes the stereo music. DR Airplane Mode Your HT820 can be used to listen to music through the inline stereo connector even when switched off. The Bluetooth link will be ended but inline audio will still function. AF Low Battery If the headset battery is discharged, the inline audio function will not work until the battery has been recharged. Range T Your HT820 headset conforms to Bluetooth power class 2 for a range of 30 feet (10m).
DR used with a Bluetooth power class 1 device such as the Motorola DC800 Bluetooth Transceiver or USB PC Adapter PC850 (see next page).
DR • The Stereo Transceiver supports high power Bluetooth (Class 1) which allows you to roam up to 150 feet (50 meters) away while listening to crystal clear digital music AF • Stream MP3’s from your home computer or laptop and play them over your home stereo speakers by using the Motorola USB PC Adapter PC850 Motorola USB PC Adapter PC850 • Fully Bluetooth 1.2 compliant • USB 1.
DR Supports stereo audio, sychronization, file transfer, dial up networking, and other profiles AF T 40 Using Your Headset
motorola.
