Welcome RY Welcome to Motorola’s “connected” world of Bluetooth ® personal area wireless networking. IN A You can place a call directly from yourBluetooth Wireless Headset by using your Bluetooth capable phone and your phone’s voice activation feature. The headset provides handsfree convenience and freedom from cables and wires. Bluetooth wireless technology makes all connections quickly and without any cables.
1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States) 1-800-461-4575 (Canada) www.motorola.com RY Personal Communications Sector 600 North U.S. Highway 45 Libertyville, Illinois 60048 IM IN A MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under license.
Contents ............................ 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 RY Safety and General Information A What Is Bluetooth Wireless Technology? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How Can I Use My Wireless Headset? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What Is Included in This Kit? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Headset Features . . . . . . . .
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. RY Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. IN A This device complies with part 15 of the FCC Rules.
Safety and General Information Aircraft RY When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. Medical Devices IN A Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker.
Safety and General Information such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. RY Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
Introduction What Is Bluetooth Wireless Technology? RY Bluetooth wireless technology propels you into a new dimension in connectivity. IN A Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. Your Bluetooth Wireless Headset can communicate with other Bluetooth devices within a range of approximately 10 meters (33 feet).
Introduction What Is Included in This Kit? This package includes the following: • Motorola Headset equipped with Bluetooth wireless technology.
Introduction Headset Features Headset Off (boom closed) Headset On (boom open) 3 2 6 IN 1 10 A 8 RY 4 9 5 7 M 1—Headset Indicator LED Provides visual cue about headset status. PR E LI 2—Volume Control Buttons Adjusts speaker (receive) volume up and down. 3—Microphone Picks up your voice input. 4—Boom Contains microphone and controls power (On/Off) status of headset. 5—Earhook Attaches headset to ear. 6—Speaker Plays the sound you receive on the call.
Using Your Headset RY Charging Your Headset When to Charge A First-Time Use—Before you can use your headset, you need to charge its selfcontained battery for two hours. IN Recharging—When you hear five rapid high tones through the headset speaker, repeated at 20-second intervals, the headset battery needs to be recharged. IM Over extended periods of time, batteries gradually wear down and require longer charging times. This is normal.
Using Your Headset Step 1 Plug the Motorola charger into the headset, with the charger’s release tab and the headset both facing up. RY How to Charge A 2 Plug the other end of the charger into an electrical outlet. IN During charging, the headset indicator turns on and remains lit until charging is complete. Your headset requires approximately two hours to receive a full charge.
Using Your Headset Wearing the Headset Placing the Headset on Your Ear IN 2 Loop the earhook over your ear. A Step 1 Open the boom, then open the earhook (45˚ from the headset). RY When packaged, the headset is configured for wear on the right ear. 3 Press the headset to your ear. PR E LI M 4 Point the boom toward your mouth.
Using Your Headset Changing for Wear on the Left Ear When packaged, the headset is configured for wear on the right ear. To change it for wear on your left ear: IN A RY Step 1 Open the boom, then open the earhook (90˚ from the headset). PR E LI M 2 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then pull it away to remove it. 3 Flip the headset over.
Using Your Headset Storing Your Headset in its Holster PR E LI M IN A Step Slip the headset down into the holster, with the lanyard tab pointing up and the earhook facing the inside of the holster. RY Your headset comes with a holster where you can store it when you are not using it.
Using Your Headset Pairing Your Headset and Phone Note: You must pair your headset and phone before you can make a call. RY “Pairing” creates a link between devices equipped with Bluetooth wireless technology and allows the phone to remember the headset’s unique ID. Once your headset and phone are paired, your headset automatically connects to your phone any time you open the boom. A Pairing IN With the headset and phone in close proximity: M Step 1 Put the headset into pairing mode.
Using Your Headset IN For details on device discovery for another phone, refer to the user’s guide for the phone. A Settings > Connection > Bluetooth Link > Hands Free > Look For Devices The phone displays: 4 Press the YES soft key on the phone to bond to the headset. It may take several seconds to establish a connection. 5 When Enter Bluetooth Passkey appears, enter the passkey 0000, then press OK on the phone to pair the headset with the phone. The device ID is now stored in the phone’s memory.
Using Your Headset Paired Link to Additional Devices RY Your headset can store pairing information for up to eight different devices equipped with Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in chronological order. When an attempt to pair to more than eight devices is made, the oldest paired device is removed from the list. Any of the eight paired devices can initiate a paired connection to the headset.
Using Your Headset Controlling Headset Volume Increasing and Decreasing Volume RY To increase speaker volume, press the top volume button repeatedly until you reach the desired volume level. A To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level. PR E LI M IN Note: Because the headset is equipped with Volume Orientation Technology, it does not matter whether you wear the headset on the right or left ear.
Using Your Headset Placing and Receiving Calls Your headset supports both Hands Free and Headset Profiles. Accessing call functionsdepend on which profile your phone supports. Device Status Phone Headset On Off (boom closed) Make a Voice Dial Call On in idle Dial a Number Press & hold E until LED remains lit. Release E, open boom. Press & hold E until LED remains lit.
Using Your Headset Function Device Status Phone Headset Action Hands Free Profile Headset Profile On–phone rings On Short press E (call is answered) Press E (call is answered) Reject a Call On–phone rings On Long press E N/A Answer 2nd incoming call On–in call, 2nd call coming in On Long press E, places 1st call on hold, answers incoming call N/A Toggle between two active calls On–in call, 2nd call on hold On Long press E N/A Transfer call from phone to Headset On–in call A IN M On
Using Your Headset Using Your Headset Indicators Headset Indicator (LED) RY With charger plugged in: Headset charging in progress A Headset Indicator ON charging complete M With no charger attached: IN OFF ON (steady) LI Headset Indicator OFF Headset power off pairing mode pairing successful flashes at a 5-second interval (.1 seconds ON, 4 seconds OFF) standby (not on a call) flashes at a 8-second interval (2.0 seconds ON, 6.
Using Your Headset RY Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off. Any button press on the headset will reawaken the headset and the flashing resumes. If you press the up and down volume buttons simultaneously, the flashing LED turns off.
