User's Manual

ManualsBrandsGN Netcom ManualsAudio EquipmentGN Ellipse 2G4 Wireless Headset

For More Information:

Pour Plus de Détails:

Para Más Información:

Para Obter Informações Adicionais:

www.gnnetcom.com

CORPORATE HEADQUARTERS

77 Northeastern Blvd.

Nashua, NH • 03062

1-800-826-4656

1-603-598-1100

Fax: 1-603-598-1122

Preliminary • Printed in the U.S.A.

GN Ellipse 2.4

Wireless Headset System

* Charge battery for 3 hours prior to initial use.

User Guide

Ellipse Components

Remote Backpack

2 Base

3 Base Stand

4 Headset Holder

5 Headset

(included with System purchase

or as an option)

6 AC Power Adapter

7 Telephone Cord

8 Remote Battery

9 Remote Handset Lifter

(included with System purchase

or as an option)

10 Pocket Clip

11 Belt Clip

12 Lanyard

Summary of content (4 pages)

PAGE 1
User Guide 1 2 Ellipse Components 1 Remote Backpack 2 Base 3 Base Stand 4 Headset Holder 5 Headset (included with System purchase or as an option) * Charge battery for 3 hours prior to initial use. Wireless Headset System* 3 4 6 AC Power Adapter 7 Telephone Cord 8 Remote Battery 9 Remote Handset Lifter GN Ellipse 2.4 (included with System purchase or as an option) 5 For More Information: Pour Plus de Détails: Para Más Información: Para Obter Informações Adicionais: www.gnnetcom.
PAGE 2
1 2 Remote Beltpack Functions Battery Information 1 Battery Type Headset Mode Indicator: Blinks when the system is in headset mode; no light in handset mode. 2 Volume Control: Press + to increase volume. Press - to decrease volume. 3 3 Mute Button: Press to activate Mute and disable the transmit/microphone; press again to enable transmit/microphone. 4 4 Capacity On-Line Capacity Off-Line Nickel Metal Hydride (NiMH), 3.6 V 500 mAH (GN Netcom part number 27381101).
PAGE 3
Setting Up 1. Connect all cords. 5. Connect the Headset to the Remote. 8. Make sure the Mute is off. When Mute is on, a tone sounds in the Headset every 3 seconds. 6. Slide the Remote into the Charger on either side of the Base. The Battery Charge light on the side of the Base illuminates. Charge the Battery for a full 3 hours. Use the Handset while the Battery charges. 9. Put the Headset on and select a telephone compatibility setting until dial tone is clear.
PAGE 4
Using The Remote FAQs 12. To roam up to 200 ft. (150 m) from the base, remove the Remote from the Base Charger and clip it to your belt or pocket, or wear it with the Lanyard. Adjusting Remote Beltpack Buzz Volume Put the System in Handset Mode. Simultaneously press the upper and lower parts of the Volume Button as well as the Mute Button. The Headset Mode Indicator light on the remote lights up indicating you are in buzzer setting mode.