User's Manual

GN 9350 GN 9330 GN 9330 USB
7.3 Base’s visual indicators
Base action Visual indication
Telephone mode button’s indicator/
�ase talk button
Lit when in telephone mode and flashing when linked up
US� mode button’s indicator/
�ase talk button
Lit when in US� mode and flashing when linked up
Mute functionality indicator (red) Lit when mute is activated
�attery indicator (4 green diodes) 1 LED light = 25% of a full charge
4 LED lights = 100% full charge
Rightmost lit diode flashes when charging, leftmost diodes
are lit
Leftmost diode flashes when <30 minutes of talk time
remaining
When headset placed in cradle for charging, all diodes light
for 1 second
8. Troubleshooting
GN 9350 GN 9330
GN 9330 USB
Q: Nothing happens when I try to adjust the clear dialtone.when I try to adjust the clear dialtone.
A: Make sure the base is set for telephone mode and the link is established (telephone but-
ton’s indicator on base is flashing). Also ensure that the telephone is activated (handset is off
the hook or line button is pressed).
Q: I am getting a buzzing sound on my headset.
A: If the unit has been correctly set-up, your telephone may not be fully immune to the radio
signals the headset uses. To overcome this problem, move the headset base at least 30 cm away
from the telephone. On GN 9350, you may want to reduce the range of your unit instead.
GN 9350 GN 9330
GN 9330 USB
Q: My customers say they cannot hear me.
A: Ensure the base unit is in the correct system setting by adjusting the clear dial tone switch.
You should experience a high quality dial tone from the headset. Then call a friend and adjust
your headset’s microphone as described in the Guide for basic set-up and use.
For setting information on your telephone system, please also refer to www.gnnetcom.com/
gn9300/support.
17