User Manual
10 11
Making calls:
1. With the boom arm open, press
the Multifunction Button on either
the headset [C] or
the base [B].
An audible tone will be heard and
the connection will be established
shortly.
2. Lift the telephone’s handset, or
press the telephone’s line button
if your telephone has one. A dial
tone will be heard.
3. Dial the desired number when the
dial tone is heard in your headset.
The headset indicator and the on-line indicator will fl ash rapidly for the duration of the call.
Answering calls:
1. With the boom arm open, press the Multifunction Button on either the headset
or the base. An audible tone will be heard and the connection will be established
shortly.
2. Lift the telephone’s handset, or press the line button if your telephone has one.
The headset indicator and the pairing indicator will fl ash rapidly for the duration of the
call.
Ending calls:
1. Press the Multifunction Button on either the base or the headset.
2. Lower the telephone’s handset, or press the line button if your telephone has one.
Headset handset switching (while on a call).
To switch from using the headset to the
handset during a call:
1. Terminate the link between the head-
set and the base by either closing the
headset boom arm [A] or pressing the
Multifunction Button on the base [B] or
the headset [C].
2. The call is now terminated in the headset,
and can be continued in the handset.
3. To end the call, hang up the telephone
handset.
To switch from using the handset to the headset during a call:
1. With the boom arm open, press the Multifunction Button on either the headset
or the base. An audible tone will be heard and the connection will be established
shortly.
2. The call is now terminated in the handset, and can be continued in the headset.
3. To end the call, press the Multifunction Button on either the base or the headset, or
close the headset boom arm.
4. Lower the telephone’s handset. On telephones equipped with a line button, press
the line button to end the call.
5. You may continue wearing the headset, or place it in the base (with the boom arm
closed) for recharging.
A
B
C
D
B
C
A
GN6110_contents_EU_21-10-03.indd 10-11 23-10-2003, 09:39:23