User Manual

24 25
The headset’s visual indicators:
Headset mode Headset indicator
Power Off OFF (no charger)
Charging in Process ON (charger plugged in, or headset placed in
base)
Charging Complete OFF (charger plugged in, or headset placed in
base)
Pairing Mode ON (no charger) with headset boom arm opened
Pairing Successful Series of 10 rapid fl ashes
Audio Link (on a call) Rapidly fl ashes
Headset ON, but not on a call Continously fl ashes (slow rate)
Opened boom arm (turn ON) Lights for two seconds
Closed boom arm (turn OFF) Lights for two secons
Test link established Flashes twice
The base’s visual indicators:
Base’s on-line indicator On-line indicator
On-line with a call Flashes
Base’s pairing indicator Pairing indiator
Pairing Mode ON
Pairing Successful Series of 10 rapid fl ashes
Base reset Successful Light for two seconds
Base’s multifunction indicator Multifunction indicator
Battery indication Number of lit indicators indicates level of charge
1 lit indicator = 25% charged
2 lit indicators = 50% charged
3 lit indicators = 75% charged
4 lit indicators = 100% charged
Hook Switch setting mode Number of lit indicators indicates hook switch
mode:
1 lit indicator = RHL hook switch mode selected
(default)
2 lit indicators = DHSG hook switch mode
selected
3 lit indicators = AEI hook switch mode
selected
ALL base’s indicators
Power is turned ON
All indicators
Light for a few moments.
5. Frequently asked questions
Should I unplug my telephone’s line cord from the wall?
No, do not unplug your telephone’s line cord from the wall. Your GN 6110 is not a
telephone, but rather works with your desk telephone. The GN 6110 base accesses the
telephone line via your existing desk telephone.
I’ve set up my GN 6110 but I still don’t hear a dial tone?
There are several possible reasons why you do not hear a dial tone. Check that:
• The various cords are correctly set up and inserted.
• The clear dial tone adjustment (using the termination switch at the bottom of the
base) is correct.
• The power supply is correctly hooked to the base.
• You have not unplugged your desk telephone’s telephone line.
What is the yellow-coloured AUX button on the bottom of the base for?
The yellow-marked AUX socket is where you may connect the (optional) GN 1000
Remote Handset Lifter’s connector cord. By connecting the GN 1000, you may answer/
end calls while away from your desk.
GN6110_contents_EU_21-10-03.indd 24-25 23-10-2003, 09:39:26