User's Manual
5
pressing ‘Yes’ or ‘OK’ on the phone and conrm with the passkey
or PIN = 0000 (zeros). Your phone will conrm when pairing is complete.
In case of unsuccessful pairing, put the Jabra BT2020 into pairing mode
manually. First, make sure the headset is o. Then press and hold the
answer/end button for approximately 5 seconds until the LED has a solid
blue light. The LED will ash before the light is constant – keep holding
down the button until light is constant. When the headset is in pairing
mode, repeat steps 2 and 3.
8. Wear it how you like it
The Jabra BT2020 is ready to wear on your right ear. If you prefer the left ear,
gently rotate the MiniGel™ 180 degrees as shown.
To ensure that you get the best t possible in your ear,
two dierent kinds of MiniGel’s™ are provided with the
Jabra BT2020. To exchange the MiniGel™, simply remove
the gel by twisting it gently.
For optimal performance, wear the Jabra BT2020
and your mobile phone on the same side of your body
or within line of sight. In general, you will get better
performance when there are no obstructions
between your headset and your mobile phone.