User Manual Part 1

5
english
JABRA BT8040 BLUETOOTH STEREO HEADSET
Pair it with your phone
Before you use your Jabra BT8040, you will need to pair it with
your mobile phone.
1. Your headset will automatically go into pairing mode when you
turn it on the rst time.
2. Set your Bluetooth phone to discover the Jabra BT8040.
Follow your phone’s instructions. This usually involves going to a
‘setup, connect, or ‘Bluetooth menu on your phone and selecting
the option to discover’ or ‘add’ a Bluetooth device.*
BT8040
JABRA BT8040
JABRA BT8040
3. Your phone will nd the Jabra BT8040.
Your phone then asks you if you want to pair with it. Accept
this by pressing ‘Yes’ or ‘OK’ on the phone and conrm with the
passkey or PIN = 0000 (4 zeros). Your phone will conrm when the
pairing is complete.
In the case of an unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
You can manually put your Jabra BT8040 into pairing mode, if you
want to pair with a second phone or Bluetooth device:
1. Ensure that the headset is o.
2. Press and hold the answer/end button for approx. 5 sec. until
the light turns solid Blue.
3. Set your Bluetooth phone to discover your headset as
described above.