User's Manual

4
ENgLiSh
JABRA BT8030 BLUETOOTH STEREO HEADSET
5
ENgLiSh
JABRA BT8030 BLUETOOTH STEREO HEADSET”
TURN oN yoUR hEAdSET
• Press the on/o/pairing button to turn on your headset – when the headset is on the LED indicator light
will ash.
• Press and hold the on/o/pairing button to turn the device o. The led ash red to indicate that the
headset is turned o.
PAiRiNg WiTh A PhoNE oR oThER dEvicE
• Before you use your Jabra BT8030 you must pair it up with a mobile phone or/and another Bluetooth
• enabled music device. If you have not paired your headset with a mobile phone before, your headset will
• automatically go into pairing mode. Otherwise use the following procedure:
1 Put the headset into pairing mode:
• Make sure headset is turned o.
• Press and hold the on/o/pairing button until the indicator light is solid blue.
The headset is now in paringmode.
2 Set your mobile phone or other device to ‘discover’ the Jabra BT8030
• Follow your phones instruction guide . This usually involves going to a ‘setup’, ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to discover or add a Bluetooth device. (See example from
typical mobile phone in g. 4)
3 Your phone will nd the Jabra BT8030
• Your phone or other device will ask if you want to pair with it, accept this with “Yes” or “ok” and conrm
with the passkey or PIN = 0000 (4 zero’s). Your phone or other device will conrm when pairing is com
-
plete. In case of unsuccessful pairing repeat steps 1 to 3.
Fig.4
4 Connecting with a second device
You are able to connect your BT8030 with two devices, enabling music playing and phone connectivity at
the same time. Refer to your PC/MP3 player/phone manual for details regarding pairing for that device.
The procedure for the headset is as described above in step 1.
WEARiNg yoUR JAbRA bT8030
As a headset your Jabra BT8030 is designed to be comfortably worn with the headband on your head.
On the side of the headset there is ‘L’ and ‘R’ markings indicating Left and Right position of the headset.
The headset can be adjusted for optimal t by expanding the length of the ear pieces.
Used as a speaker the Jabra BT8030 should be placed on a at surface facing the ear-cushions towards you
and having the buttons on top. The Left (L) and Right (R) markings also indicate the right positioning of the
speaker.
The microphone is integrated in the left earpiece and Digital Signal Processing (DSP) is used for clear pickup
of your voice regardless of use as a headset or a speaker.
TRANSfoRMiNg ThE JAbRA bT8030 fRoM hEAdSET ModE To SPEAkER ModE
To switch from headset mode to speaker mode you will need to press the Safety Release buttons (see g 5)
on the top of the headband, and press the two earpieces outwards. Please note that you need to press the
buttons on each side of the headset to transform to a speaker.
The build-in Safety mechanism is to ensure that the Jabra BT8030 will not go into speaker mode while
operating in headset mode.
hoW To…
When connected via Bluetooth to a stereo device your Jabra BT8030 realizes its full potential. The right hand
side of your Jabra BT8030 is dedicated for use when playing music in stereo. These buttons will work when
the device you have connected to is able to support the Bluetooth remote control (AVRCP) prole – See
glossary for more information on this.
The large button on the right side of the device is the Play button. On the top there are the skip forward and
skip back buttons.
To start Play:
• Make sure your headset is connected in stereo mode (Advanced Audio Distribution Prole (A2DP)). Tap
the Play button once
To Pause:
• Tap the Play button – tap again to resume playing
To Stop:
• Long Press the Play button
Answer a call when playing music:
• Tap the Answer/end button and the music will be paused and the call will be connected. The music will
resume after the call has ended (dependent on your device supporting this feature).
Skip one track forward:
• Tap the Skip Forward button [Skip Forward Symbol]- continue tapping to skip several tracks forward
(see next page)